Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test HP2-B68 est lequel très important dans les tests de Certification HP. Pour être qualifié de HP, on doit obtenir le passport de test HP HP2-B68.
Dépenser assez de temps et d'argent pour réussir le test HP HP0-Y49 ne peut pas vous assurer à passer le test HP HP0-Y49 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Un bon choix de l'outil à se former est le point essentiel à passer le test HP HP2-B68, et les documentations à propos de rechercher le test HP HP2-B68 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Code d'Examen: HP2-B68
Nom d'Examen: HP (HP AC Integration and Support Technical-Job Accounting)
Questions et réponses: 40 Q&As
Code d'Examen: HP0-Y49
Nom d'Examen: HP (HP ATP FlexNetwork Solutions)
Questions et réponses: 65 Q&As
Le test HP HP0-Y49 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
HP0-Y49 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y49.html
NO.1 When LLDP is enabled, which value is presented by default as the LLDP Chassis ID on both
ProVision and Comware switches?
A. Router ID
B. System Name
C. IP address
D. MAC address
Answer: D
HP examen HP0-Y49 examen HP0-Y49 examen HP0-Y49 examen
Explanation:
<Sysname> display lldp local-information
Global LLDP local-information: Chassis ID : 00e0-fc00-5600 System name : Sysname System
description : H3C Comware Software. H3C S12508 Product Version S12500-C
MW710-B01BBIT25. Copyright (c) 2004-2011 Hangzhou H3C Tec
h. Co., Ltd. All rights reserved. System capabilities supported : Bridge, Router System capabilities
enabled : Bridge, Router
MED information: Device class : Connectivity device MED inventory information of master board:
HardwareRev : REV.A FirmwareRev : 109 SoftwareRev : 5.20 Alpha 2101 SerialNum : NONE
Manufacturer name : H3C Model name : H3C Comware Asset tracking identifier : Unknown
Table 1 Command output Field Description Global LLDP local-information Global LLDP information
to be sent. Chassis ID Bridge MAC address of the device.
Reference:
http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Switch
es/H3C_S12500_Series_Switches/Command/Command/H3C_S12500_CR-Release71286W710/ 04 / 20
1301 /772500_1285_0.htm
4. Refer to the exhibit. Exhibit: Network topology
The server shown in the exhibit is configured for dynamic LACP . There is only one link between
Switch 1 and Switch 2. Which HP switching solution should the network administrator implement?
A. Distributed trunking on Comware Switches or ProVision switches
B. IRF on Comware switches or Provision switches
C. IRF on Comware switches or but not on ProVision switches
D. Distributed trunking on ProVision switches but not on Comware switches
Answer: C
HP certification HP0-Y49 HP0-Y49 examen
5. Which open standard allows a switch with PoE support to correctly determine the power
requirements of a connected device?
A. ICMP
B. AutoPower
C. LLDP-MED
D. CDP
Answer: C
certification HP HP0-Y49 certification HP0-Y49 certification HP0-Y49 HP0-Y49 examen
Explanation:
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet
Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on
an IEEE 802 local area network, principally wired Ethernet. Media Endpoint Discovery is an
enhancement of LLDP , known as LLDP-MED, that provides the following facilities:
- Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority and Differentiated services settings)
enabling plug and play networking. - Device location discovery to allow creation of location
databases and, in the case of Voice over Internet Protocol (VoIP), Enhanced 911 services. - Extended
and automated power management of Power over Ethernet (PoE) end points.
6. Which HP solution delivers automated virtual machine orchestrator, automatic
synchronization of network connectivity information, and visibility to performance of wired and
wireless users?
A. Unified Wired-WLAN modules and switches
B. Intelligent Management Center (IMC)
C. Virtual Connect FlexFabric
D. Intelligent Resilient Framework
Answer: B
certification HP HP0-Y49 examen HP0-Y49
Reference: http://h17007.www1.hp.com/docs/mark/ 4AA3-4496ENW.pdf
7. Which HP Intelligent Management Center (IMC) component would a network administrator
check to verify the installation of IMC or an add-on module?
A. Deployment Monitoring Agent
B. Deployment Analyzer
C. Service Manager
D. Process Manager
Answer: A
HP examen certification HP0-Y49 certification HP0-Y49 HP0-Y49 examen HP0-Y49 examen HP0-Y49 examen
8. Which HP Comware component allows a network administrator to adjust the logging process?
A. SNMP management center
B. Information center
C. Logging process
D. System logging center
Answer: B
HP certification HP0-Y49 certification HP0-Y49 HP0-Y49
Explanation:
Acting as the system information hub, information center classifies and manages system
information, offering a powerful support for network administrators and developers in
monitoring network performance and diagnosing network problems.
The following describes the working process of information center:
- Receives the log, trap, and debugging information generated by each module. - Outputs the above
information to different information channels according to the user-defined output rules. - Outputs
the information to different destinations based on the information channel-to-destination
associations.
9. Two OSPF routers are on a segment, and both of their interfaces become active. What is the
initial OSPF state after an adjacency has formed?
A. Established
B. Exstart
C. Two-way
D. Full
Answer: B
HP examen HP0-Y49 examen certification HP0-Y49 HP0-Y49 examen
10. What does an IP host learn from an ARP reply?
A. An IP address
B. The local subnet
C. A MAC address
D. A Netbios name
Answer: C
HP HP0-Y49 examen HP0-Y49 examen HP0-Y49 examen
NO.2 A network administrator executes these commands on an HP Comware switch:
[Comware] super password level 1 simple hp1 [Comware] super password level 2 simple hp2
[Comware] super password level 3 simple hp3 [Comware] quit <Comware>
The network administrator then executes this command to test the configuration: <Comware>
super 0
What is the outcome of the configuration?
A. The network administrator is immediately placed into Monitor view.
B. Access is denied because no level 0 password has been defined.
C. A password of hp0 must be entered to access the view.
D. The network administrator is immediately placed into visitor view.
Answer: D
certification HP certification HP0-Y49 certification HP0-Y49
NO.3 Which command can a network administrator execute to manage configuration files on an HP
Comware switch?
A. Write file
B. Startup-default
C. Delete
D. Write memory
Answer: C
certification HP HP0-Y49 HP0-Y49 examen HP0-Y49
没有评论:
发表评论